Applies To Product(s): OpenPlant Modeler Version(s): 08.11.09.xxx (SS5) & 08.11.11.xx (SS6) Environment: Windows 7/8 (64 bit) Area: Component Subarea: Original Author: Harpreet Singh, Bentley Product Advantage Group Background By default, tools for some components are not present in piping task but they could be placed with the help of key-in command. If user want to add this component in piping task he will need to modify the DGNLIB file. In this example we will add ANGLE_CHECK_VALVE as a tool to the piping task Steps to Accomplish In OpenPlant Modeler, go to Workspace > Customize menu. In the customize dialog, go to File menu and select pm_tools.dgnlib file to open as highlighted below. Once the DGNLIB opens up, expand the pm_tools.dgnlib node and go to valves tool box. Right click on Place Valves and select add tool option. Name the tool as 'Angle Check Valve' as shown below. Add the command data as highlighted below. In General Settings, click ellipse button to open the icons. Select the icon for the tool and click OK. Change other settings as highlighted below. Drag the tool from left side and place it under Angle Valve tool on the right side. NOTE: If you want you can group Angle Valve and Angle Check Valve in User task. Now go back to the model (DGN file) and check piping task. Place the valve to verify the result. Comments or Corrections? Bentley's Product Advantage Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!
↧