Applies To Product(s): OpenPlant Isometrics Manager Version(s): 08.11.09.XXX (SS5) & Others Environment: Windows 7/8.1/10 (64 bit) Area: Customization Subarea: Original Author: Dinesh Solanki, Bentley Prodcut Advantage Group Introduction Sometimes many user do not prefer to show gaskets in the Isometrics as fabricators and designers might confuse it with a component. Below steps will help you to not show gaskets in the output. make a note this Wiki covers scenario when OpenPLANT Modeler is worked with OpenPLANT Isometric manager. However, the steps will be the same when user is using AutoPLANT Modeler with OpenPLANT Isometric manager with some changes in the path. Steps to Accomplish Using Isometric configuration open seed file. Go to IsoExtractor--->Cell Creation Tool to Open Create Cell Dialog. Click Open Template file button to open Select Template file dialog. Browse to your project path to open Custom.cel. Now, import the (gasket) cell PGKT from lisocomp.cel to custom.cel using steps below. Delete the square from the gasket cell and save. See result below showing Isometrics as required. See Also Comments or Corrections? Bentley's Product Advantage Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!
↧