Applies To Product(s): OpenPlant Isometrics Manager Version(s): 08.11.09.XXX Environment: Windows 7 64/32 bit Area: Settings/Attributes Subarea: - Original Author: Abhijit Bute, Bentley Technical Support Group Background In AutoPLANT Isometric spool ends type (SW, BW, PL, SCREWED) information is important for fabrication purpose. By default ends type information is not populated in Isometric cut list, but f ollowing steps will guide how to add end types in cut list. Steps To Accomplish Navigate the project path. Below example shows default metric project path: C:\ProgramData\Bentley\Plant V8i\Bentley Plant V8i Projects\SAMPLE_METRIC\Config\OpenPlant\Isometrics\styles\IFC\config. Open report.def file and a dd two new COLUMN entries to show " CM1" and " CM2" attributes . #----------------------------------------------------------------------------- # The CUT report lists the pipe cut pieces # Attaches to text node 61 #----------------------------------------------------------------------------- REPORT = CUT INCLUDE = IE_TYPE=CT_PIPE|CT_BEND COLUMN = 6:C:CUTID COLUMN = 7:R:SIZE1 COLUMN = 21:R:QUANTITY COLUMN = 3:R: COLUMN = 80:W:IE_DESCRIPT COLUMN = 100:W:CM1 COLUMN = 110:W:CM2 GROUP = CUTID SORT = CUTID NODE = 61 END Generate isometric and verify result. Comments or Corrections? Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!
↧