Applies To Product(s): OpenPlant Isometrics Manager Version(s): 08.11.09.XXX Environment: Windows 7/ 8.1/ 10 (64 bit) Area: Settings/Attributes Subarea: Configuring the BOM and Reports Original Author: Kestutis Mitkus, Bentley Product Advantage Group Background In Report Definition a various report combinations, based on various type of attributes can be configured easily, but each of these reports won't have sequential Components numbering system in BOM. In this Wiki article you will find possible suggestions How to Generate Reports based on Size with Sequential Numbering system. Case #1 When Isometrics is generated each component is assigned with its unique PARTID number. PARTID property is a common components grouping and sorting property, which is used in Bill Of Material and PARTID assignment order can be configured in rep_sortgroups.txt file. Steps to Accomplish Open rep_sortgroup.txt file and in the beginning of this file, add additional SORTGROUPs, in order to sort components by setting RULEs based on size. In this example I have added a OWNER Group with rules to sort 8 and above 8 inches Size components and the CONTRACTOR group in order to sort the rest. SORTGROUP = OWNER HEADER = @ ------------------------------------------ HEADER = @ OWNER Group HEADER = @ ------------------------------------------ RULE = IE_TYPE=CT_PIPE|CT_BEND && SIZE1>=8 RULE = IE_TYPE=CT_FLANGE && SIZE1>=8 RULE = IE_TYPE=CT_FITTING_TEE && SIZE1>=8 RULE = IE_TYPE=CT_REDUCER && SIZE1>=8 RULE = IE_TYPE=CT_ELBOW && SIZE1>=8 RULE = IE_TYPE=.*VALVE.* && SIZE1>=8 SORTGROUP = CONTRACTOR HEADER = @ ------------------------------------------ HEADER = @ CONTRACTOR Group HEADER = @ ------------------------------------------ RULE = IE_TYPE=CT_PIPE|CT_BEND RULE = IE_TYPE=CT.* Now PARTID numbers will be assigned by using these rules. For testing purpose we have created one report in report.def file by editing SHP report to include Shop and Field components. REPORT = SHP # this to include only shop material INCLUDE = IE_FIELD=0 INCLUDE = IE_FIELD=1 EXCLUDE = IE_TYPE=CT_WELD COLUMN = 2: L : PARTID COLUMN = 8: C : QUANTITY COLUMN = 11: C : SIZE COLUMN = 6: C : RATING + SCHEDULE COLUMN = 60: W : IE_DESCRIPT GROUP = PARTID SORT = PARTID:N SEP = @ SORTHEADERS = 1 # this is to show SORTGROUP HEADER #TEXT = @ ---------------------------------------------------------- #TEXT = @ Shop Materials #TEXT = @ ---------------------------------------------------------- Write = NODE = 60 END Using these steps we have prepared one report in which all components can be sorted between OWNER and CONTRACTOR groups. Don't forget to comment FIELD and Combi reports. Save all changes and generate Isometrics to verify the results. Case #2 If there is some special requirements to have some components in different reports then there is possibility to create several reports inside report.def file and combine them to present it in generated isometrics model. In this example user had a requirement to: " SIZE >= 8” (200), or other specific items (such as Relief Valves), exclude field components, existing components, bolt and gasket, they are belong to OWNER group. "SIZE = 8 REPORT = OwnerPipes INCLUDE = SIZE1 >= 8 && EC_CLASS = PIPE|PIPE_BEND EXCLUDE = IE_TYPE=CT_WELD COLUMN = 4: L : PARTID COLUMN = 6: C : QUANTITY COLUMN = 11: C : SIZE COLUMN = 6: C : RATING + SCHEDULE COLUMN = 60: W : IE_DESCRIPT GROUP = PARTID SORT = PARTID:N SEP = @ SORTHEADERS = 0 END In OwnerFittings I have included all components which SIZE1 >= 8, excluded all pipes, bolts and gaskets REPORT = OwnerFittings INCLUDE = SIZE1 >= 8 EXCLUDE = EC_CLASS=PIPE|PIPE_BEND EXCLUDE = IE_TYPE=CT_BOLT|CT_GASKET EXCLUDE = IE_TYPE=CT_WELD COLUMN = 4: L : PARTID COLUMN = 6: C : QUANTITY COLUMN = 11: C : SIZE COLUMN = 6: C : RATING + SCHEDULE COLUMN = 60: W : IE_DESCRIPT GROUP = PARTID SORT = PARTID:N SEP = @ SORTHEADERS = 0 END In Contractor I have included all components which SIZE1 = 8 && EC_CLASS=WELD_NECK_FLANGE EXCLUDE = SIZE1 >= 20 && EC_CLASS=WELD_NECK_FLANGE EXCLUDE = IE_TYPE=CT_BOLT|CT_GASKET EXCLUDE = EC_CLASS=PIPE|PIPE_BEND EXCLUDE = IE_TYPE=CT_WELD COLUMN = 4: L : TICKID COLUMN = 6: C : QUANTITY COLUMN = 11: C : SIZE COLUMN = 6: C : RATING + SCHEDULE COLUMN = 60: W : IE_DESCRIPT # GROUP = PARTID SORT = TICKID:N SEP = @ SORTHEADERS = 0 END ------------------------------------------------- REPORT = OwnerFittings2 INCLUDE = SIZE1 >= 8 EXCLUDE = IE_TYPE=CT_BOLT|CT_GASKET EXCLUDE = EC_CLASS=PIPE|PIPE_BEND EXCLUDE = SIZE1 >=8 && EC_CLASS=WELD_NECK_FLANGE EXCLUDE = IE_TYPE=CT_WELD COLUMN = 4: L : PARTID COLUMN = 6: C : QUANTITY COLUMN = 11: C : SIZE COLUMN = 6: C : RATING + SCHEDULE COLUMN = 60: W : IE_DESCRIPT GROUP = PARTID SORT = PARTID:N SEP = @ SORTHEADERS = 0 END Don't forget to edit Combi report. Save changes, generate ISO via OPIM and verify the results See Also Comments or Corrections? Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this Comments or Corrections?" section. THANK YOU!
↧