Applies To Product(s): OpenPlant Isometrics Manager Version(s): 08.11.09.XXX (SS5) Environment: Windows 7/8.1/10 (64 bit) Area: Settings/Attributes Subarea: Original Author: Kestutis Mitkus, Bentley Product Advantage Group Background Adding a custom property SHEETNO to the OpenPlant Modeler WELDs, and getting that property to display in WELD Label of the generated Isometrics. Steps to Accomplish In class Editor, Open OpenPlant_3D.01.07.ecschema, which by default is located at this path: C:\ProgramData\Bentley\OpenPlantModeler V8i\WorkSpace\Projects\ [...Project Name...] \DataSet\Schemas Locate the class you will be editing (WELD in this sample) and add a new SHEETNO property in the Properties tab. Save all changes and Supplement same schema with the Supplemental Isometrics IsoExtractor schema. To Supplement it, use right click mouse on OpenPlant_3D Schema and Click on "Supplement Schema" option. See image below Locate same WELD class again, select SHEETNO property in the Properties tab and add Calculated EcExpression custom attribute to it. Add this EcExpression this.GetRelatedInstance("ISO_SHEET_HAS_DEVICE:1:ISO_SHEET").NUMBER and other fields as in this picture below Save and close the schema. Open OpenPlant Isometrics Manager and load required style's Configuration dialog Edit existing Weld Label as in picture below Save all changes and test it with Isometrics model. You should now be able to see Weld Label as in this picture below See Also Comments or Corrections? Bentley's Product Advantage Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!
↧