Applies To Product(s): OpenPlant Isometrics Manager Version(s): 08.11.09.470 (SS6) Environment: Windows 7/8.1/10 (64 bit) Area: Settings/Attributes Subarea: Original Author: Dinesh Solanki, Bentley Product Advantage Group To Label valve Tag in OpenPlant Isometrics Manager. Background There could be requirement to get tag number on Valves in Isometrics. Below are some simple steps to accomplish this necessity..This has been shown in context with AutoPLANT Modeler and OpenPlant Isometrics Manager. AutoPLANT Modeler-OpenPlant Isometrics Manager Steps to Accomplish Add a valve Tag in AutoPLANT Modeler. See Image below: Open Isometric configuration dialog through Project Administrator. See image below. Under User Labels tag Enter the data with steps 1,2,3, as shown in image below. Assign all the value of component attribute. Selection of the expression IE_TYPE should be done carefully to get it appear in isometrics. This can be checked and confirmed from the component tag list shown in this step later. In Include field, type as shown below IE_TYPE=CT_VALVE_STRAIGHT and in Text Field Type, $(IE_TAG) . Fill the Type & Cell Name as " Note ". See image below for details. Click Save and generate the isometric, the IE_TAG value will get displayed. See image below. User can also set the other component attribute value in User label dialog as per requirement. To get the component Tag information see image below for reference. See Also Comments or Corrections? Bentley's Product Advantage Group requests that you please confine any comments you have on this Wiki entry to this Comments or Corrections?" section. THANK YOU!
↧