Applies To Product(s): OpenPlant Isometrics Manager Version(s): 08.11.11.87 Environment: Windows 7 (64 bit) & others Area: Settings/Attributes Subarea: Original Author: Rahul Kumar, Bentley Product Advantage Group Overview In OpenPlant Isometrics Manager, to hide Supports, Symbols, Dimensions etc. Problem Description In OpenPlant Isometrics Manager, using OpenPlant Modeler, user wanted to hide supports and to plot isometrics. While extracting these multiple format output, it is required sometimes hide supports and publish as per requirement. With the use on new Overrides.txt file option, which permits user to write a set of rule & to achieve desired results. Below are the steps to check. Steps to Resolve Launch OpenPlant Isometrics Manager. From Style folder select Overrides.txt file. Say default “ Check ” style here. Get files from ( ….WorkSpace\Projects\OPModeler_Metric\DataSet\Isometrics\Styles\Check\Config ) Open File and add below entries. RULE INCLUDE = IE_TYPE=CT_SUPPORT STYLE = 2 LEVELNAME = Supports Note – Check link >>>> to know more on Overrides.txt fie Save & Close File. Generate Isometrics. See levels for supports assigned with new level as Support. Note – By default all level goes to Level 1 Using Level Display option Check OFF support. To hide Labels, use “ User Labels ” option and check off “Support Tag Labels”. See image below. To hide dimensions, use “ Dimensioning ” option and check ON “ Hide Support dimension ”. See image below. Save changes. To Hide Part ID’s, you need to make it Skip from rep_sortgroups.txt file using variable SKIP = 1 as shown in below image. Generate Isometrics. See isometrics below, where supports information removed successfully. Note – It will also remove information from BOM. Still a Problem? If above problem still persist, then please create a Service Request and contact the Bentley Product Advantage group. Please include a list of all relevant details to get in depth analysis for a solution or workaround. See Also Comments or Corrections? Bentley's Product Advantage Group requests that you please confine any comments you have on this Wiki entry to this Comments or Corrections?" section. THANK YOU!
↧