Forum Post: RE: Iso Extractor OPSE
Yes Peter, It is a known issue. You can also check in Readme File. Attaching one image below for your quick reference. Please try with i model and report us back if any issue. HTH -Regards | Rahul Kumar
View ArticleForum Post: AP OPIM - Dimension discrepancy on socket fittings
Does anyone know how to set/fix dimension discrepancy on socket fittings? For example, for 2" Tee or Elbow, each leg should be dimension as 38 mm, but currently it dimensioned one leg 38 mm and one leg...
View ArticleForum Post: RE: AP OPIM - Dimension discrepancy on socket fittings
Hello Maggie, Can you please check with default spec for AutoPLANT Modeler & OpenPlant Isometrics Manager? Kindly mention Version details to allow us to check at our side. In case it is specific to...
View ArticleForum Post: RE: Autoplant Reinforcing Pad not shown in bill of materials of...
Hi Kestutis, I have opened the following service request 7000620020, and attached to it are the model, i-model, isometric dwg,pcf and I00- Thanks
View ArticleWiki Page: How to Use Grid Lines in OpenPlant Isometrics Manager
Applies To Product(s): OpenPlant Isometrics Manager Version(s): 08.11.09.440 & Above Environment: Windows 7 (64 bit) Area: Settings/Attributes Subarea: Original Author: Rahul Kumar, Bentley...
View ArticleComment on AutoPLANT V8i (SELECTseries 8) Refresh ReadMe
Hello Patrick, At first I experienced the same issue that you did, but after I extracted the CHM file to my desktop, I was able to open it without a problem.
View ArticleForum Post: OP integrated WorkSpace in File Mode
We are working on implementing the following products from OP suite, File Based We would prefer an integrated WorkSpace for all modules Have integrated OPM, OPIM & OPSE Currently working on...
View ArticleForum Post: RE: OP integrated WorkSpace in File Mode
Hello Peter, I would say, it will be good to start with. It does not require any specific user workspace for working. During installation you will get a sample workspace from where you can test user...
View ArticleForum Post: RE: OPIM: AutoPlant Model Name on Iso
Thanks Berrie for the response. However, this method gets all models that the linenumber appears, so the line could be in multiple models, how do I get just the model that the iso was dropped from?
View ArticleWiki Page: StartUp Error-Launching OpenPlant Modeler
Applies To Product(s): OpenPlant Modeler Version(s): 08.11.09.XXX (SS5) | 08.11.11.XXX (SS6) Environment: Windows 7/8.1/10 (64 bit) Area: Start Up Subarea: Original Author: Rahul Kumar, Bentley Product...
View ArticleWiki Page: How to Add PIPELINE_NUMBER in Valve Tag in OpenPlant PID
Applies To Product(s): OpenPlant PID Version(s): 08.11.10.XXX (SS5) | 08.11.11.XXX (SS6) Environment: Windows 7/8.1/10 (64 bit) Area: Customization Subarea: Original Author: Jaya Tiwari, Bentley...
View ArticleForum Post: OPM SS6 - Grid report with multiple item types
Hi, Just wondering if it is possible to create a grid report that can include multiple items in its query? What we are trying to do is to have grid report containing piping_components, bolts and...
View ArticleForum Post: RE: OPM SS6 - Grid report with multiple item types
Hello Tuan Le, Please refer below wiki article for similar case. Also there are other various ways of extracting reports discussed under OpenPlant Reporting article. HTH -Regards | Rahul Kumar
View ArticleForum Post: RE: OPM SS6 - Grid report with multiple item types
Ah, I knew it should have been pretty straight forward. Thanks Rahul. Best regards, Tuan Le
View ArticleForum Post: why is not display filename ?
As I build new component,at create tool dialog step,it seems that only the filename is PIDProjectSymbols.dgnlib can display in dialog ,otherwise it can not display in here, is right?
View ArticleForum Post: why can not manipulate custom component?
In OPPID, I define a legend , In schema, class named is BOUNDARY_LINE.I set values in component custom attributes, such as enabled mirror、move、rotate、scaler and so on.see 1.png As I place the legend, I...
View ArticleForum Post: How to drag custom equipment by vertex?
In oppid, user define equipment cell, as place equipment, I hope drag the cell by vertex,such as place vessel,see 1.png, how to do it ?
View ArticleForum Post: How to display only one flow arrow in pipeline？
In OPPID, i hope only one flow arrow in every pipeline, such as specify at start point or end point ,see 1.png ?
View ArticleForum Post: RE: OPM SS6 - Standard Preferences does not update when changing...
Hi Harpreet, Sorry for the delay. SR 7000621618 is raised. Best regards, Tuan
View Article