Applies To Product(s): OpenPlant Orthographics Manager Version(s): 08.11.11.87 (SS6) Environment: Windows 7/8.1/10 (64 bit) Area: View Arrangement Definition File Subarea: Edit Original Author: Faisal Khan, Bentley Product Advantage Group To rotate view at some angle in existing View Arrangement Definition (VAD) File in OpenPlant Orthographics Manager Background If user want to rotate existing view at some angle in view arrangement definition (VAD) file, then user needs to follow below mentioned steps. Steps to Accomplish Launch OpenPlant Orthographics Manager and select a project Go to Drawing Generation –-> Create View Select “Open an existing view arrangement definition (VAD) file” from “Open” button Load a view arrangement definition file to “Edit” from “Load VAD File” dialog The selected file will be loaded in OpenPlant Orthographics Manager Go to “View Output Position” tab Change the angle to desired one from “Rotation” drop down say change it to “90” Save the changes by pressing save button Press “Yes” to “Confirm same view name” confirmation pop up message After saving, go to Drawing Generation ---> Generate Select a View Arrangement Definition (VAD) File in which rotation angle is defined by clicking the box and press “Generate Drawings” to generate output drawing Confirm that angle in changed to selected one (90 degree in this case) See Also OpenPlant Orthographics Manager Help Comments or Corrections? Bentley's Product Advantage Group requests that you please confine any comments you have on this Wiki entry to this Comments or Corrections?" section. THANK YOU!
↧