Applies To Product(s): OpenPlant Modeler Version(s): 08.11.09.XXX (SS5) | 08.11.11.XX (SS6) Environment: Windows 7/8.1/10 (64 bit) Area: Settings\Attributes Subarea: - Original Author: Bentley Product Advantage Group Background OpenPlant Modeler configuration variable list for the user to use it inside the working project to allow them to customize it as per requirement. Check various lists of use. This can be used at various stage of work. Some variable examples can be found in existing wiki articles which can also be searched using the keywords of this configuration. OpenPlant Configuration variable Below is a list of available configuration variables which control various OpenPlant functions and procedures. Autofitting Config Variable Value Definition OPM_SUPPORTED_MIN_ANGLE 1 Defines the min angle for placement of pipe bends and trimmed elbows OPM_SUPPORTED_ANGLES 0,45,60,90 List of angles supported for component placement in autofitting OPM_SUPPORTED_ANGLE_TOLERANCE 2.5 Tolerance for exactly matching the bend angles OPM_MISALIGNMENT_ALLOWANCE 10 The OPM_MISALIGNMENT_ALLOWANCE variable is an angular tolerance value for allowing the AutoFitting routine to dynamically place a rigid fitting at a non-exact angle when the user-interface toggle Allow Misaligned Fittings is ON. This toggle is useful for a dynamically placed sloped pipeline to place rigid, though slightly misaligned, branch fittings and bends. The angular value is applied (+/-) to both sides of the dynamically misaligned connection. OPM_AUTOFITTING_TRIM_STOCK_ANGLES 90;45 Default elbow angle types for trimmed elbows supported in AutoFitting OPM_AUTOFITTING_ELBOW_TYPES LongRadius; ShortRadius; 3R List of elbow types supported by Auto fitting OPM_HVAC_AUTOFITTING_GENERICCOMPONENT 1 To place generic/custom component if we dont find that component in spec Component Placement Config Variable Value Definition OPM_MIN_ANGLE_FOR_MITERED_ELBOWS 30 Default Min angle limit for mitered elbows OPM_MAX_ANGLE_FOR_MITERED_ELBOWS 90 Default Max angle limit for mitered elbows OPM_REPLACE_BEND_KEEP_BEND_RADIUS 1 When value set to 1, this variable will preserve the pipe bend radius or pipe bend radius factor on existing bend components during the Change Size/Change Spec function. OPM_QUICK_REPLACE 1 Enables to disables the appearance of the replace component option on the right click menu. A value of 0 means no menu pick. 1 means to show the menu pick OPM_HOOKUP_TOOL_ANGLES_FILE ${OPM_USER}/HookupAngles.xml hookup tool angle xml location OPM_HEAL_ON_DELETE 1 Enable or disable the pipe healing on component deletion OPM_HEAL_MAX_DELETED 30 Max no. of component deletion to invoke the pipe healing OPM_GEN_BRANCH_MIN_ANGLE_DIFF 45 Min allowable angle between Main/Run and Branch ot avoid the overlapping cylinders OPM_ATTRIBUTESTOCHECK NOMINAL_DIAMETER List of mandatory properties that should be matched between the mating components Connectivity Config Variable Value Description OPM_USE_ATTRIBUTESTOCHECK_VAR_FOR_REPLACEMENT 0 Is used by replace command to refine replacement list; if the variable value is set to 1, replace command will use all properties defined by OPM_ATTRIBUTESTOCHECK and End Preperation property to filter out components. OPM_TRAY_OPTIONAL_ATTRIBUTESTOCHECK SPECIFICATION list of optional properties that should be matched between mating components OPM_TRAY_ATTRIBUTESTOCHECK NOMINAL_WIDTH;NOMINAL_HEIGHT List of mandatory properties that should be matched between the mating components OPM_QUERY_BOLTS_WITH_IGNORE_LENGTH 0 Ignore Bolt Length for getting spec records OPM_AUTO_BOLT_SELECTION 1 Suppresses the Spec Selection dialog and selects bolt with a length closest to the defined minimum length. OPM_OPTIONAL_ATTRIBUTESTOCHECK SPECIFICATION list of optional properties that should be matched between mating components OPM_OPENEND_SEARCH_FACTOR 0.5 is factor multiplied to Nominal Diameter to search for open ports near a given port in connectivity checker. OPM_MATCH_PROPERTY_MAP_RATING CL150;CL125|CL250;CL300|PN25; PN40|PN10;PN16 List of compatible rating values for mating components OPM_MATCH_PROPERTY_MAP_FACING C;D|E;F Pair of facing values are compatible with each other OPM_FLANGE_JOINT_TOLERANCE 0.25 Define the max gap length between the matting flanges in PSDS or PDx dgn to consider it for a flange joint OPM_DEFAULT_WELD_TYPE SHOP Default weld type to be used for component connection OPM_DEFAULT_WELD_SPHERE_RADIUS 0.2 Size of the weld symbol OPM_DEFAULT_WELD_LENGTH 0 default weld gap OPM_CONNECTIVITY_TOLERANCE 0.05 Allowable gap between the mating ports for a valid joint between them OPM_ALIGNMENT_TOLERANCE 1 Angular tolerance in Degrees between the mating port Equipment/Nozzle Manager Config Variable Value Description OPM_RANGE_BOX_EXPAND_PERCENTAGE 15 The OPM_RANGE_BOX_EXPAND_PERCENTAGE specifies the percentage of expansion desired in the range bounding box that replaces the existing graphics of a user-defined equipment during the Drop command OPM_EQUIP_TEMPLATES ${OPM_USER}/equip_templates/ Location for the Equipment templates OPM_NOZMGR_TRY_TYPE_ORDER Axial Order of nozzle types appear in nozzle manager OPM_NOZMGR_TRANSPARENCY_PERCENTAGE 70 Value of transparence OPM_NOZMGR_TEMPLATES ${OPM_USER}/nozzle_templates/ Location for the nozzle manager template OPM_NOZMGR_SUPPRESS_GRID_DATA_VALIDATION Y Suppress the runtime validation of the data entered OPM_NOZMGR_SHOW_TYPE_DIAGRAM Y Show Type diagram OPM_NOZMGR_SHOW_EQUIP_TRANSPARENT Y Make equipment transparent OPM_NOZMGR_SHOW_DATUM Y Show Datum OPM_NOZMGR_REQUIRE_SYSTEM N Nozzle require system OPM_NOZMGR_REQUIRE_LINENUMBER N Nozzle require line number OPM_NOZMGR_HIGHLIGHT_CURRENT_EQUIPMENT Y Highlight current equipment OPM_NOZMGR_DECIMAL_SEPARATOR . Decimal separate symbol OPM_NOZMGR_DECIMAL_PLACES 3 No. of digits show after decimal OPM_NOZMGR_DATUM_WEIGHT 5 Line weight of the datum graphics OPM_NOZMGR_DATUM_LEVEL ReservedForNozzleManager Level assigned to the datum OPM_NOZMGR_DATUM_COLOR_Z 1 Datum Z Axis color OPM_NOZMGR_DATUM_COLOR_Y 3 Datum Y Axis color OPM_NOZMGR_COPY_SPECNOZZLE_PROPERTIES DEVICE_TYPE_CODE Copy properties OPIM Config Variable Value Description OPIM_QUANTITY_FOR_CONNECTIVITY LENGTH Dimension for connectivity OPIM_ISOMETRIC_WORKFILE_ROOT $(_USTN_PROJECTWORKFILES)Isometrics/ root folder for isometric work files OPIM_ISOMETRIC_DATASET_ROOT $(_USTN_PROJECTDATASET)Isometrics Root folder where Isometric related settings are stored OPIM_ISO_USER_GROUP ISOProduction Isomeric User group OPIM_CONNECTIVITY_TOLERANCE $(OPM_CONNECTIVITY_TOLERANCE) Connectivity Tolerance for Isometrics OPMS Config Variable Value Description OPMS_DEFAULT_CONNECT_MODE 1 Controls whether user is prompted to login to an OPMS repository. OPMS_STATIC_QUERY_PATH $(_USTN_PROJECTDATASET)ModelServer/ OPMS Static Query Path OPMS_RUN_IN_GUID_AUTOFIX_MODE True Controls to check the GUID property and sets it if blank OPMS_PROJECT_REPOSITORY_NAME OPM_Imperial Specifying the project name on the repository OPMS_SUPPLEMENTAL_SCHEMA OpenPlant_3D_Supplemental_Model_Server.01.04 OPMS supplemental schema for the project PDx Config Variable Value Description PDX_ENABLED 1 Do validity check for PDx native format elements for OPMS checkin, should be set to 1 for all PDx conversion projects OPM_RELATE_UNITS_TO_EQUIPMENT 1 Relate Unit to Equipment OPM_PDX_UPGRADE_LOW_PRIORITY_CLASSES NOZZLE;OLET List of component which should be processed at the end during the PDx Upgrade OPM_PDX_UPGRADE_HIGH_PRIORITY_CLASSES PIPE List of the ciomponents which should be processed first during PDx upgrade process OPM_PDX_UNREINFORCED_BRANCH_TAG UBR_STUB_IN Branch Tag for PDx components mapped with Unreinforced EC Class OPM_PDX_REINFORCED_BRANCH_TAG RBR_STUB_IN Branch Tag for PDx components mapped with Reinforced EC Class OPM_PDX_CONVERT_SKIP CONTROL_VALVE List of components that sould be skipped during the PDx convert process OPM_PDX_CONVERSION_SPEC_QUERIES 1 Skip the spec querying for PDx convert process OPM_NOZZLE_TAG_UPGRADE False Nozzle tag upgrade process during PDx upgrade OPM_EQUIPMENT_UNIT_PROPERTY_NAME UNIT Unit property name for the equipment OPM_DELETE_ORPHAN_CELLS_DURING_UPGRADE 0 Controls the the deletion of orphan cells in an upgrade process MS_PDXMANAGER_PDS_RDB_STD_NOTE us_stdnote.l Name of the standard note library for PDx Spec MS_PDXMANAGER_PDS_RDB_PJSTB us_pjstb.l Name of pjstb type file of PDx spec MS_PDXMANAGER_PDS_RDB_PCDIM us_pcdim.l Name of PCIM type file of PDx Spec Project Attributes and Schema Config Variable Value Description _USTN_PROJECTWORKFILES (_USTN_PROJECTDATA)WorkFiles/ Project Workfile location _USTN_PROJECTNAME OPModeler_Imperial Project Name _USTN_PROJECTDESCR OpenPlant Modeler Sample Imperial Project Project Description _USTN_PROJECTDATASET $(_USTN_PROJECTDATA)Dataset/ point to the location of the OpenPlant 3D Dataset folder PROJ_MASTER_UNIT FEET Defines Project Master Units for ISO generation PROJECTWISE_DATASOURCE specify list of datasources separated by ; OPM_SUPPLEMENTAL_SCHEMA OpenPlant_3D_Supplemental_Imperial_DefaultValues.01.04 Supplemental schema for OPM Primary schema OPM_PRIMARY_SCHEMA OpenPlant_3D.01.04 OPM Primary Schema name OPM_DIR_SCHEMAS $(_USTN_PROJECTDATASET)Schemas/ List the path of all schema files OPIM_SCHEMA_PATH $(OPM_DIR_SCHEMAS) Schema Storage location OPIM_SCHEMA_LIST Bentley_Building_CustomAttributes.01.00 OPIM schema list OPIM_PRIMARY_SCHEMA $(OPM_PRIMARY_SCHEMA) OPIM Primary schema name Reporting Config Variable Value Description OPR_REPORT_TREE_DEFINITIONS $(OPM_REPORT_DATASET_ROOT)TreeDefinition/ OPM Reporting setup file location OPR_REPORT_REPORT_DEFINITIONS $(OPM_REPORT_DATASET_ROOT)ReportDefinition/ OPM Reporting setup file location OPR_REPORT_DATASET_ROOT $(_USTN_PROJECTDATASET)Reports/ OPM Reporting setup file location OPR_REPORT_CRYSTAL_TEMPLATES $(OPM_REPORT_DATASET_ROOT)CrystalTemplates/ OPM Reporting setup file location OPM_REPORT_TREE_DEFINITIONS $(OPM_REPORT_DATASET_ROOT)TreeDefinition/ Report Tree definition OPM_REPORT_REPORT_DEFINITIONS $(OPM_REPORT_DATASET_ROOT) ReportDefinition_opm/ Report definition OPM_REPORT_OUTPUT $(_USTN_PROJECTWORKFILES)Reports/ Report Output location OPM_REPORT_DATASET_ROOT $(_USTN_PROJECTDATASET)Reports/ OPM Report tools location OPM_REPORT_CRYSTAL_TEMPLATES $(OPM_REPORT_DATASET_ROOT) CrystalTemplates_opm/ Crystal report template location OPM_REPORT_CELL_TEMPLATES $(OPM_REPORT_DATASET_ROOT)Cell/ Cell template location for Reports OPM_AREA_REPORTING_REPORT_TEMPLATE_NAME CenterlineReportTemplate Area report template name OPM_AREA_REPORTING_OUTPUT_PATH $(OPM_REPORT_OUTPUT) Area report output location Schema Config Variable Value Description OPM_SUPPLEMENTAL_SCHEMA OpenPlant_3D_Supplemental_Imperial_DefaultValues.01.04 Supplemental schema for OPM Primary schema OPM_PRIMARY_SCHEMA OpenPlant_3D.01.04 OPM Primary Schema name OPM_DIR_SCHEMAS $(_USTN_PROJECTDATASET)Schemas/ List the path of all schema files OPIM_SCHEMA_PATH $(OPM_DIR_SCHEMAS) Schema Storage location OPIM_SCHEMA_LIST Bentley_Building_CustomAttributes.01.00 OPIM schema list OPIM_PRIMARY_SCHEMA $(OPM_PRIMARY_SCHEMA) OPIM Primary schema name Project Seed files and Library files Config Variable Value Description MS_SYMBRSRC $(_USTN_PROJECTDATASET)Symb/*.rsc List of RSC files defining the symbology for the project MS_SEEDFILES $(_USTN_PROJECTDATASET)Seed/ Seed file used to create new DGN models for the Project MS_DGNLIBLIST $(_USTN_PROJECTDATASET)Dgnlibs/*.dgnlib Dgnlibs used by OpenPlant Modeler. This variable is a list so we will append our project Dgnlibs to the list. We will use a * to indicate that all dgnlibs in the dataset Dgnlibs folder will be loaded. MS_DESIGNSEED pmseed3d.dgn Seed file used to create new DGN models for the Project. MS_DEF $(_USTN_PROJECTDATA)WorkFiles/models/ Default location of project's dgn files. MS_CELL $(_USTN_PROJECTDATASET)Cell/ Project Cell libraries location Misc Config Variable Value Description OPM_TRAY_SEGMENT_GENERATION_ATTRIBUTES NOMINAL_WIDTH; NOMINAL_HEIGHT;SPECIFICATION List of properties that define the position where one Segment stops and the next starts OPM_SHOW_SEGMENTS 1 Variable to control the display of the piping segment tab in UI. OPM_SEGMENT_GENERATION_ATTRIBUTES NOMINAL_DIAMETER;SPECIFICATION Semicolon separated list of properties which should be same among component belonging to one segment OPM_FILE_STANDARD_PREF_DB $(_USTN_PROJECTDATASET)Settings/ stdprefs.accdb Defines the database that be used to setup picklist and other items in the standard preferences dialog. OPM_DATASET_SETTINGS $(_USTN_PROJECTDATASET)Settings/ Defines the database that be used to setup picklist and other items in the standard preferences dialog. OPM_PXF_PATH $(_USTN_PROJECTWORKFILES)Stress/ PXF path for stress STRUCTURAL_SHAPES us.xml Variable defines the Structural Shape file use in the Piping Support module when determining section properties for some pipe supports. Spec settings Config Variable Value Description OPM_USE_DEFAULT_SPEC_CHOICE 0 Default Spec Choice, 0 = false, 1 = true OPM_SPECVALIDATION_ATTRIBUTESTOCHECK NOMINAL_DIAMETER;RATING; SHORT_DESCRIPTION;DESCRIPTION; MATERIAL;MANUFACTURER; CODE;RATING The OPM_SPECVALIDATION_ATTRIBUTESTOCHECK variable is a semicolon seperated list of Properties that are checked against the spec properties when using the Spec Check tools. OPM_SPECS_PLUGIN_DATABASES $(_USTN_PROJECTDATASET) MappingDatabases/ Mapping databases location OPM_SPECPLUGIN_PSDS_UNITS MM Units for PSDS Spec OPM_SPECPLUGIN_PDX_UNITS MM Units for PDx Spec OPM_SPECPLUGIN_PDX_STANDARDS AMS;DIN Standard type of PDx spec OPM_SPECPLUGIN_CURRENTSOURCE OPM Default spec mode selection option OPM_DIR_SPECS $(_USTN_PROJECTDATASET) SpecsDatabases/ Spec Database location OPM_SPECPLUGIN_OPM_UNITS IN Unit type of spec database OPM_SPECPLUGIN_OPM_DIM_CONVERSIONFACTOR 1 Factor for converting ND values in dimensional values in scripts See Also Also Check Help File Menu Comments or Corrections? Bentley's Product Advantage Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!
↧