Applies To Product(s): AutoPlant Piping Version(s): 08.11.11.XXX Environment: Windows 7/ 8.1/ 10 (64-bit) Area: Reports - AutoPlant Piping Subarea: Original Author: Berrie Geboers, Bentley Product Advantage Group Go to menu Piping > Reports > Generate Reports... Select an appropriate report name (layout), in this example STANDARD (You also could use the default BY LINENUMBER report) Establish all settings as in picture below.. …(For Imperial unit, the Unit/Precision fields are For units Imperial And the Precision in Inches. (Special attention to Omit Sort Codes = 0) Click OK and Select the advanced selection mode... Define the query and Select accordingly picture below… Click the browse button as indicated in picture above… Select all necessary welds to report… see picture below... Click OK and make the query active by clicking the Add button Click OK and verify the results This report can be send to the printer or Exported to any kind of export format. Or, by leaving the preview open, you can go to C:\ProgramData\Bentley\Plant V8i\reports, find a file called report.mdb, copy and paste that file in the same directory. After the closing of the preview, you still have the file copy of reports.mdb available in the location above. This file can be used in Access as desired. Comments or Corrections? Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this Comments or Corrections?" section. THANK YOU!
↧