Applies To Product(s): OpenPlant Isometrics Manager Version(s): 08.11.09.XXX Environment: Windows 7 32/ 64 bit Area: Settings/Attributes Subarea: Original Author: Bentley Technical Support Group Background Some users may require an Isometric drawing without Tagging, Spooling, Dimensions or Bill of Information. Use the following to remove all or some or all of this information from the Isomeric output as is required. BOM tagging Go to the style’s rep_sortgroup.txt Add the Group at the top before the first rule SORTGROUP = SKIPALL RULE=IE_TYPE=CT.* SKIP = 1 Save and close Remove the Spool labels and other labels Open the style in Isometric Configuration Go to User Labels Uncheck Pipe Spool Labels Uncheck any other unneeded User Labels Remove Dimensions Open the style in Isometric Configuration Go to Dimensioning Go to Primary tab Check Hide Overall Dimensions Check Hide Component Dimensions Remove Pipe size label s Open the style in Isometric Configuration Go to Converter Settings Uncheck Place Diameter Labels Uncheck Place Diameter Change Labels Remove Coordinate labels Open the style in Isometric Configuration Go to Converter Settings Uncheck Coordinate Labels At All Extremities Open lisocomp.cel file for the style located at Project_Name\DataSet\Isometrics\Styles\Style_name\Cell Find the PLANTC model Rename the PLANTC model to PLANTC_NOSHOW Save and close Remove the BOM output Go to the style’s report.def file Delete or Comment out the COMBI report by adding # before each line like below #REPORT = combi # WRITE = shp # TEXT = @ # TEXT = @ # WRITE = fld # NODE = 60 #END Delete or Comment out the CUT report adding # before each line like below #REPORT = CUT # INCLUDE = IE_TYPE=CT_PIPE|CT_BEND # COLUMN = 6:C:CUTID # COLUMN = 7:R:SIZE1 # COLUMN = 21:R:QUANTITY # COLUMN = 3:R: # COLUMN = 80:W:IE_DESCRIPT # GROUP = CUTID # SORT = CUTID # NODE = 61 #END Save and close the file. Remove Slope hatching Open the style in Isometric Configuration Go to Annotation Hatch Set Hatch Spacing (mm) 0 Save and close Comments or Corrections? Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this Comments or Corrections?" section. THANK YOU!
↧