Wiki Page: How to Accumulate Weight Information
Applies To Product(s): OpenPlant Isometrics Manager Version(s): 08.11.11.XXX (SS5) | 08.11.11.XXX (SS6) Environment: Windows 7/8.1/10 (64-bit) Area: Settings/Attributes Subarea: Configuring the BOM and...
View ArticleWiki Page: Error:[5] Detail Sketch Not found in cell libraries
Applies To Product(s): OpenPlant Isometrics Manager Version(s): 08.11.09.XXX (SS5) | 08.11.11.XXX (SS6) Environment: Windows 7/8.1/10 (64 bit) Area: Settings/Attributes Subarea: Cell Template Original...
View ArticleWiki Page: How to Add Desired Custom Property Value to OpenPlant Isometrics BOM
Applies To Product(s): OpenPlant Isometrics Manager Version(s): 08.11.09.XXX (SS5) | 08.11.11.XXX (SS6) Environment: Windows 7/8.1/10 (64 bit) Area: Settings/Attributes Subarea: Configuring the BOM and...
View ArticleWiki Page: How To Add Field components Under Shop Material In Bill Of Materials
Applies To Product(s): OpenPlant Isometrics Manager Version(s): 08.11.09.XXX (SS5) | 08.11.11.XXX (SS6) Environment: Windows 7/8.1/10 (64-bit) Area: Settings/Attributes Subarea: Configuring the BOM and...
View ArticleWiki Page: Graphics Issue- Distorted graphics- Display Graphics in OpenPlant...
Applies To Product(s): OpenPlant Modeler Version(s): 08.11.09.XXX (SS5) Environment: Windows 7/8.1 (64 bit) Area: Open/Save Subarea: Graphics Original Author: Rahul Kumar, Bentley Product Advantage...
View ArticleForum Post: RE: OpenPlant Modeler V8i SS5 Database files for Cable Trays
Hello Curtis, Based on SR # 7000546031 raised, we have logged Enhancement # 562323. This will further gets evaluated by development & Product Management team. Submitting for your information...
View ArticleForum Post: RE: How can I open Descartes SS6 in Openplant SS6?
Hello Erick, Did you find some time to check above solution proposed by Tony? Please update if you need further assistance on it. -Regards | Rahul Kumar
View ArticleForum Post: RE: Openplant File Printing Default Name
Thanks Harpreet, Now I am looking for a vba code to save tagset member to a specific config variable , and actually my expectation is when a user give print command this code should run before print...
View ArticleForum Post: OPM - Pipe Level Name
Hi, In OPM, how would one go about setting the levels of placed pipe and components? Can I have all pipes placed on a single preset level, all valves on another level, all flanges on yet another level...
View ArticleForum Post: RE: OPM - Pipe Level Name
Hello Tuan, Levels and its symbology gets handled using Named Expression. By default it picks the pipeline level. There are many articles written on various use cases. Below are the articles and its...
View ArticleWiki Page: ATDB0726: Relationship Manger error code reported -2147467261...
Applies To Product(s): AutoPLANT Modeler Version(s): 08.11.10.111 & Above Environment: Windows 7 (32/64 bit) & Others Area: Component - AutoPLANT Modeler Subarea: N/A Original Author: Abhijit...
View ArticleWiki Page: Standard Preferences Dialog Disappeared from OpenPlant Modeler
Applies To Product(s): OpenPlant Modeler Version(s): 08.11.09.xxx (SS5) | 08.11.11.xxx (SS6) Environment: Windows 7/8.1/10 (64 bit) Area: Properties Subarea: Original Author: Harpreet Singh, Bentley...
View ArticleWiki Page: Errors, Logs, Messages, Crashes - OpenPlant Modeler
Applies To Product(s): OpenPlant Modeler Version(s): 08.11.09.XXX & Others Environment: Windows 7 (64 bit) Area: - Subarea: - Original Author: Bentley Product Advantage Group Errors/Logs/Message...
View ArticleWiki Page: "Failed to Find Cell Library for Diagram" Error While Placing...
Applies To Product(s): OpenPlant Modeler Version(s): 08.11.09.xxx (SS5) | 08.11.11.xxx (SS6) Environment: Windows 7/8.1/10 (64 bit) Area: Component Subarea: Original Author: Harpreet Singh, Bentley...
View ArticleWiki Page: How to Open Generated dwg Isometric in AutoCAD Instead of...
Applies To Product(s): OpenPlant Isometrics Manager Version(s): 08.11.09.XXX (SS5) | 08.11.11.103 (SS6) Environment: Windows 7/8.1/10 (64 bit) Area: Settings/Attributes Subarea: Original Author:...
View ArticleWiki Page: How to Generate Reports based on Size
Applies To Product(s): OpenPlant Isometrics Manager Version(s): 08.11.09.XXX (SS5) | 08.11.11.XXX (SS6) Environment: Windows 7/8.1/10 (64 bit) Area: Settings/Attributes Subarea: Configuring the BOM and...
View ArticleWiki Page: How to Generate Reports based on Size with Sequential Numbering...
Applies To Product(s): OpenPlant Isometrics Manager Version(s): 08.11.09.XXX (SS5) | 08.11.11.XXX (SS6) Environment: Windows 7/8.1/10 (64 bit) Area: Settings/Attributes Subarea: Configuring the BOM and...
View ArticleWiki Page: How to Add Piping Component Properties on Weld Reports
Applies To Product(s): OpenPlant Isometrics Manager Version(s): 08.11.09.XXX (SS5) | 08.11.11.XXX (SS6) Environment: Windows 7/8.1/10 (64 bit) Area: Settings/Attributes Subarea: Configuring the BOM and...
View ArticleWiki Page: How to set Different PLANT North in OpenPlant Isometrics Manager
Applies To Product(s): OpenPlant Isometrics Manager Version(s): 08.11.09.XXX (SS5) | 08.11.11.XXX (SS6) Environment: Windows 7/8.1/10 (64 bit) Area: Settings\Attributes Subarea: Style.cfg Original...
View Article