Wiki Page: Error: XCHG0000: Invalid Translation Format: OPIM in OpenPlant...
Applies To Product(s): OpenPlant Isometrics Manager Version(s): 08.11.09.XXX (SS5) Environment: Windows 7/8.1 (64 bit) Area: Errors-Logs-Messages Subarea: Open/Save Original Author: Dinesh Solanki,...
View ArticleForum Post: How can I open Descartes SS6 in Openplant SS6?
Hello, I'm currently trying to work with the advanced pointcloud extraction tools of Descartes in Openplant, to accelerate the modeling process of pipes from specs matching the information from a...
View ArticleForum Post: RE: How can I open Descartes SS6 in Openplant SS6?
Hi Erick, Could you please provide some snapshot of the tool which you want to load in OpenPlant Modeler? Also confirm the installation order you have followed? Regards, Harpreet
View ArticleWiki Page: Error: Exception has been thrown by the target of an invocation....
Applies To Product(s): OpenPlant Isometrics Manager Version(s): 08.11.10.564 (SS5) Environment: Windows 7/8.1/10 (64 bit) Area: ProjectWise Interoperability Subarea: Original Author: Harpreet Singh,...
View ArticleWiki Page: Error on Loading I-model from Managed Workspace in OpenPlant...
Applies To Product(s): OpenPlant Isometrics Manager Version(s): 08.11.09.564 (SS5) Environment: Windows 7/8.1/10 (64 bit) Area: ProjectWise Interoperability Subarea: Original Author: Harpreet Singh,...
View ArticleForum Post: RE: How can I open Descartes SS6 in Openplant SS6?
I need the Pointcloud Advanced tools. I installed Openplant ss6 followed by Descartes ss6, but I can't run the advanced pointcloud tools in Openplant to fit cylinders for example. Thanks for your help.
View ArticleForum Post: RE: How can I open Descartes SS6 in Openplant SS6?
Hello Erick, Can you please provide some more information regarding factors that help associates the Point cloud extraction tools with specs? -Regards | Rahul Kumar
View ArticleForum Post: RE: How can I open Descartes SS6 in Openplant SS6?
When you starts a modeling process in Descartes, you can't add intelligent information for that pipes because this geometry is just a microstation model. If I could fit cylinders and draw some pipe...
View ArticleForum Post: OpenPlant Modeler V8i SS5 Database files for Cable Trays
Hello, I'm looking for cable tray database files for the Thomas&Betts catalog. If there are files for other vendors, they would also be helpful. I see that Bentley has these integrated in their...
View ArticleForum Post: RE: How can I open Descartes SS6 in Openplant SS6?
Hello Erick, First things first - make sure you installed Bentley Descartes for MicroStation V8i (SELECTseries 6) build 08.11.09.720. This is the layered Descartes for use inside of MicroStation and...
View ArticleForum Post: RE: OpenPlant Modeler V8i SS5 Database files for Cable Trays
Hello Curtis, If you refer default project say OPModeler_Metric, you will get mcablet.mdb file present inside Specs Database folder. See path below: (C:\ProgramData\Bentley\OpenPlantModeler...
View ArticleWiki Page: Grouping of Supports Based on Common EC CLASS Name
Applies To Product(s): OpenPlant Isometrics Manager Version(s): 08.11.09.XXX (SS5) | 08.11.11.XXX (SS6) Environment: Windows 7/8.1/10( 64 bit) Area: Settings/Attributes Subarea: Configuring the BOM and...
View ArticleWiki Page: Grouping of Supports Based on Common Tag Name
Applies To Product(s): OpenPlant Isometrics Manager Version(s): 08.11.09.XXX (SS5) | 08.11.11.XXX (SS6) Environment: Windows 7/8.1/10 (64 bit) Area: Settings/Attributes Subarea: Configuring the BOM and...
View ArticleForum Post: OpenPlant Isometric Manager Administration
HI, I'm investigating OpenPlant Isometric Manager for our workflow and at this stage, I have a lot of questions. To start off, it seems OPIM only uses untitled user preferences/interface. Can that be...
View ArticleForum Post: RE: OpenPlant Isometric Manager Administration
Hi Tuan, Yes, you can change the user as per requirement and you can put your OpenPlant Modeler workspace in a network drive and let OpenPlant Isometrics Manager read that. Below are some wiki articles...
View ArticleForum Post: RE: OpenPlant Isometric Manager Administration
Thanks heaps, Harpreet. That's good news indeed and I will soldier on with my investigation then.
View ArticleForum Post: RE: OpenPlant Modeler V8i SS5 Database files for Cable Trays
Hi Rahul, Yes, we know about the BLINE catalog and are currently using it. The problem is that the BLINE catalog doesn't reflect the correct dimensions for the tray that we are using. We use Thomas...
View ArticleForum Post: RE: OpenPlant Modeler V8i SS5 Database files for Cable Trays
Thanks for Confirmation, I have communicated it to product management team & will update you shortly on this. -Regards | Rahul Kumar
View ArticleForum Post: RE: OpenPlant Modeler V8i SS5 Database files for Cable Trays
Can you create a service request for this so that we can log an enhancement to add this catalog in OpenPlant Modeler? Regards, Harpreet
View ArticleForum Post: RE: Openplant File Printing Default Name
Hi Vivek, I discussed this internally with Power Platform colleagues and found that there is no way through a named expression to retrieve the value from a tag set without first doing some sort of...
View Article