Forum Post: RE: Opening an existing isometric with OPIM
Hello Avi, You can easily drag and drop existing isometric, but it should consume extra license on it & OpenPlant Isometrics Manager should be installed on his machine. Please have look on below...
View ArticleForum Post: RE: Opening an existing isometric with OPIM
Thank you for your answer Rahul. So correct me if I'm wrong, the only way to re-open isometric drawings via OPIM, without separate license for OPIM or additional cost of OPIM license, is via Project...
View ArticleForum Post: RE: Opening an existing isometric with OPIM
hi Avi, You can generate the isometrics in DWG and open it directly using AutoCAD.
View ArticleForum Post: RE: Tagging and Annotation
Thank you Tony for this initiative. Not sure is it included in the „specials“ but some users in OpenPlant Modeler additionally to mentioned would like to annotate supports too. How this tool will...
View ArticleForum Post: RE: Opening an existing isometric with OPIM
If the resulting OPIM models are dgn format and OPIM tools are needed to edit the file then yes; your method to open an OPIM session must be used in order to OPIM with the AutoPLANT license. If the...
View ArticleForum Post: OPPID Annotation Insulation Thickness inch mark
Hello, I am trying to setup an annotation to show the following: Size-Unit-System&Number-Spec-Insulation_Thickness&Insulation Example: 4"-1_2-AQ001-A-2 " A How do I get the "inch...
View ArticleForum Post: RE: OPPID Annotation Insulation Thickness inch mark
Hello Salvador, Please find below link to modify the expressions. To add inches, you could use below wiki article. You need to add """" sign to it....
View ArticleForum Post: The issue of synchronization for properties between 'Modify...
We found this issue when a customized Crystal Report is generated, which sorts all the piping components by SERVICE. See the pic below, Well the report is not the point. It seems to just happen on...
View ArticleForum Post: RE: The issue of synchronization for properties between 'Modify...
Dear Zou Jia, Can you attach complete image of Service property expressions? Seems like it is inheriting from Piping component class? This is strange, as Seal class is defined on another level. You may...
View ArticleForum Post: RE: The issue of synchronization for properties between 'Modify...
Thanks, Rahul Kumar, Here is the complete expression, Well, I can tell. There was no the attribute 'Calculated ECProperty Specification' for the GASKET's SERVICE in the default project...
View ArticleForum Post: RE: The issue of synchronization for properties between 'Modify...
Well, with a hint from you, I did a test. In the default Metric project, the definition of the property SERVICE of GASKET is quite simple, with no ECExpressions. And the property could be revised...
View ArticleForum Post: RE: The issue of synchronization for properties between 'Modify...
Hello Zou Jia, If you know how to modify crystal reports to use multiple items, you can use Multiple classes say Seal, Piping Component, Bolt, Support and generate reports to it. See below wiki for...
View ArticleForum Post: RE: The issue of synchronization for properties between 'Modify...
Thanks, I searched the wiki, and it's easy to modify that definition file. Now my problem is how to create a crystal report template of multiple classes, any comments on it? Regards,
View ArticleForum Post: RE: Autoplant and autocad
Hi Are you sure that AutoPLANT Modeler V8i SS7 is 08.11.12.235 version? I have checked the Bentley software downloads menu and there is 08.11.12.226 versions as SS7 refresh mentioned as supported...
View ArticleForum Post: RE: Autoplant and autocad
AutoPLANT SS7 08.11.12.226 supports AutoCAD 2015. The AutoPLANT file version 08.11.12.235 refers to AutoPLANT SS7 update 1 that has been superseded by AutoPLANT SS7 Update 2 file version 08.11.12.252....
View ArticleForum Post: Generate Report BOM from Selection Set, Displayset or Item Set
Hello, I have an i.dgn from another EPC and I need to select only certain components for installation during a construction window. I need to generate a bulk BOM for these materials. I'm trying to...
View ArticleWiki Page: How to Change Default Spacing of Flow Arrow
Applies To Product(s): OpenPlant PID Version(s): 08.11.10.XXX (SS5) | 08.11.11.XXX (SS6) Environment: Windows 7/8.1/10 (64 bit) Area: Class Editor Subarea: Customization Original Author: Jaya Tiwari,...
View ArticleWiki Page: How to Map Property with Spec Field and Have it in Spec Selection...
Applies To Product(s): OpenPlant PID Version(s): 08.11.10.XXX Environment: Windows 7 (64 bit) Area: Properties Subarea: Original Author: Harpreet Singh, Bentley Product Advantage Group Background When...
View ArticleForum Post: OPM - SS6 - Slip-On orifice flange
Hello everyone, I want to add a Slip-On orifice flange. Same as WNF but SOF Would you have a solution? Kind regards, STS
View ArticleWiki Page: To Fix Grayed out Associated Property Field in OPPID
Applies To Product(s): OpenPlant PID Version(s): 08.11.10.XXX (SS5) | 08.11.11.XXX (SS6) Environment: Windows 7/8.1/10 (64 bit) Area: Class Editor Subarea: Associated Items Original Author: Jaya...
View Article