Forum Post: RE: AP-OPIM - Equipment Nozzle in ISO continuation
Hello Maggie, Below is one similar wiki article created on displaying Equipment Tag, Facing Rating Etc. Wiki - HTH, -Regards | Rahul Kumar
View ArticleForum Post: RE: AP-OPIM - Equipment Nozzle in ISO continuation
Hello Maggie, This is know issue already filed defect for this issue and it has been fixed in 08.11.12.235 patch. You need to install this patch over 08.11.12.226 build. After installing this patch you...
View ArticleForum Post: RE: OpenPlant Modeler, Gaskets
Hi, There can be several ways to amend the changes and get the desired output. In GASKET table, add few more records and set the thickness as 0. This will place gasket in OpenPlant Modeler, but with...
View ArticleWiki Page: How to use Format Specifier in OpenPlant Isometrics Manager
Applies To Product(s): OpenPlant Isometrics Manager Version(s): 08.11.09.XXX Environment: Windows 7 (64 bit) & Others Area: Settings/Attributes Subarea: - Original Author: Rahul Kumar, Bentley...
View ArticleWiki Page: How to Show Nozzle Number as Tag in OpenPlant Orthographics...
Applies To Product(s): OpenPlant Orthographics Manager Version(s): 08.11.11.87 (SS6) Environment: Windows 7/8.1/10 (64 bit) Area: Drawing Generation Subarea: Nozzle Tagging Original Author: Faisal...
View ArticleForum Post: RE: blank nominal size in pipe spec
Hello Hasnuddin Yusof, Could you please try following steps: 1. Open Specification Generator. 2. Select your project. 3. Ad select existing spec option. 4. Select spec "Mmcs150.mdb" 5. Build spec by...
View ArticleWiki Page: How to Delete Generated OpenPlant Orthographics Manager Output...
Applies To Product(s): OpenPlant Orthographics Manager Version(s): 08.11.11.87 (SS6) Environment: Windows 7/8.1/10 (64 bit) Area: Drawing Generation Subarea: Delete Output Original Author: Faisal Khan,...
View ArticleWiki Page: Settings/Attributes- OpenPlant Isometrics Manager
To Discuss various settings desired to output Isometric drawings. See Index: For OpenPlant Modeler-OpenPlant Isometrics Manager Configuring the BOM and Reports Add End type Information in Isometric...
View ArticleWiki Page: How to Display Eccentric Reducer Offset Label in OpenPlant...
Applies To Product(s): OpenPlant Isometrics Manager Version(s): 08.11.11.87 (SS6), CONNECT Environment: Windows 7/8.1/10 (64 bit) Area: Settings/Attributes Subarea: - Original Author: Rahul Kumar,...
View ArticleForum Post: RE: OpenPlant Modeler, Gaskets
Is there a wiki on adding a new flange type?
View ArticleComment on Readme for OpenPlant PID V8i SELECTseries 6 release
The readme_OpenPlantPID_SS6.chm file contains no information, it is blank!
View ArticleWiki Page: How to Generate Reports in OpenPlant Orthographics Manager
Applies To Product(s): OpenPlant Orthographics Manager Version(s): 08.11.11.87 (SS6) Environment: Windows 7/8.1/10 (64 bit) Area: Drawing Generation Subarea: Reports Original Author: Faisal Khan,...
View ArticleForum Post: Notes in several boxes in OPIM
Recently we learned that you can create a note on an isometric with several lines of text by placing a $ between the lines of text that we want. This puts all the text in one box on the isometric. We...
View ArticleComment on Readme for OpenPlant PID V8i SELECTseries 6 release
Hello Leonard, Are you able to see download option? Or after downloading you cannot see chm file? To get download option, you need to log in to Bentley site and download the Zip attached. HTH, -Regards...
View ArticleForum Post: RE: OpenPlant Modeler, Gaskets
Problem Solved, found a Wiki on " How to Create a Custom Joint ".
View ArticleForum Post: RE: OpenPlant Modeler, Gaskets
Thanks Shaun for the response, Very good to see, that it has been resolved! Keep checking all articles and do let us know if we assist you further on OpenPlant Issues. Cheers! -Regards | Rahul Kumar
View ArticleForum Post: RE: Notes in several boxes in OPIM
Hello Richard, I gave a try on it. $ sign only putting extra rows within the box. To make it in different note, you can place multiple note on it. See placement in OpenPlant Isometrics Manager: HTH,...
View ArticleForum Post: RE: Notes in several boxes in OPIM
Hi Richard, Like you noticed the $ is interpreted as a new line character when the cell used has only a single text element in it. In that case the text element serves as a template and is copied as...
View ArticleWiki Page: How to Update Bolts and Gaskets in OpenPlant Modeler
Applies To Product(s): OpenPlant Modeler Version(s): 08.11.09.XXX & Higher Environment: Windows 7/8/10 (64 bit) Area: Properties Subarea: Original Author: Harpreet Singh, Bentley Product Advantage...
View ArticleWiki Page: How to Add Units of Measurement on Property in OpenPlant PID
Applies To Product(s): OpenPlant PID Version(s): 08.11.11.43 & Higher Environment: Windows 7/8/10 (64 bit) Area: Customization Subarea: Original Author: Harpreet Singh, Bentley Product Advantage...
View Article