Forum Post: RE: OP SS6 - Connection between flanged flexible hose and flange
Hi, never mind, found this thread and it helps. communities.bentley.com/.../124124 Tuan
View ArticleForum Post: RE: AutoPLANT was unable to read the AT.INI file
Our local IT department blocked BPCom32Domain.exe and marked it as malicious, once we figured that out and unblock the file AutoPLANT ran successfully
View ArticleForum Post: RE: OP SS6 - Connection between flanged flexible hose and flange
Thanks to confirm Tuan! -Regards | Rahul Kumar
View ArticleWiki Page: How to Save DGN file as DWG Model with Inverted Display Colors of...
Applies To Product(s): OpenPlant Modeler Version(s): 08.11.11.XXX(SS6) Environment: Windows 7/8.1/10 (64 bit) Area: Import/Export Subarea: Original Author: Kestutis Mitkus, Bentley Product Advantage...
View ArticleForum Post: RE: OPIM - How to get Insulation Break (PP) on isometric drawing
Has this enhancement been done and available? Currently I need a spec break type symbol to represent some attribute/property change of connecting components Thanks, Maggie
View ArticleForum Post: Missing SPOOLID property from Component Tag in Isometric Manager
I am trying to add Spool ID labels to Isometric drawings and nothing is appearing when the drawing is generated. I have gone into the drawing and searched for the SPOOLID property and it is missing...
View ArticleForum Post: AP OPIM - Spool break
Is it possible to set spool break on field weld? or spool break when specific attribute changes? For example, a long pipe is modeled in two pieces with a field weld, we want to identify it as two...
View ArticleForum Post: RE: Missing SPOOLID property from Component Tag in Isometric Manager
Hello Brynn, By default Pipe Spool Labels are turned on in User Labels of Isometric configuration. Check Spool Identifiers section in this wiki article: Have you checked if it is turned on? In the end...
View ArticleWiki Page: Classes not Appearing in "Add New Component" Dialog
Applies To Product(s): OpenPlant Project Administrator Version(s): 08.11.09.XXX (SS5) | 08.11.11.XXX (SS6) Environment: Windows 7/8.1/10 (64 bit) Area: Specification Generator Subarea: Catalog Editor...
View ArticleWiki Page: Modifying the Isometric Content
Applies To Product(s): OpenPlant Isometrics Manager Version(s): 08.11.11.xx (SS6) Environment: Windows 7 (64 bit) & Others Area: Settings/Attributes Subarea: Iso Content Original Author: Keith...
View ArticleWiki Page: How to Enable OpenPlant Isometrics Manager to Read AutoPLANT Spool...
Applies To Product(s): OpenPlant Isometrics Manager Version(s): 08.11.09.470 Environment: Windows 7 64 bit Area: Settings/Attributes Subarea: Original Author: Dinesh Solanki, Bentley Product Advantage...
View ArticleWiki Page: Lap Joint Stub End Symbol Issue in OpenPlant Isometrics Manager
Applies To Product(s): OpenPlant Isometrics Manager Version(s): 08.11.11.87 (SS6) Environment: Windows 7/8.1/10 (64 bit) Area: Processing Subarea: Component Symbol Original Author: Deepak Singh,...
View ArticleForum Post: RE: AP OPIM - Spool break
Hi Maggie, A field weld is an implied spool break and should generate different spool numbers left/right. If you don't see these labels then something else may be the cause. OPIM out of the box marks...
View ArticleForum Post: RE: OPIM - How to get Insulation Break (PP) on isometric drawing
Hi Maggie, This feature is not available. It is in the backlog Regards, Frank
View ArticleForum Post: RE: Missing SPOOLID property from Component Tag in Isometric Manager
Hello Kestutis, I have checked that the Spool Label is turned on. We have had a software upgrade recently and the spool labels were on before the upgrade. I can not think of anything that was modified...
View ArticleForum Post: RE: AP OPIM - Spool break
Hello Maggie, I have just tested your situation and when weld type is changed to Field, after SpoolID reassignment, SpoolID is changed. Field Weld works like a SpoolID break. Which AutoPLANT Modeler...
View ArticleWiki Page: "Error: XCHG0000: Failed to initialize OpenPlant Isometric data...
Applies To Product(s): OpenPlant Isometrics Manager Version(s): 08.11.09.XXX (SS5) | 08.11.11.224 (SS6) Environment: Windows 7/8.1/10 (64 bit) Area: Settings/Attributes Subarea: Configuration Original...
View ArticleForum Post: RE: AP OPIM - Spool break
Hi Kestutis, I am using Modeler 08.11.12.235. I tried on out of box sample_MMetric project with two pipe and one elbow like your image above, but it only give out one spool number. I double check all...
View ArticleForum Post: OPIM - ISO output style can be read and used in OPIM schema?
I am trying to assign a value to a property based on ISO output style, is it possible? In short, is a function available to use in OPIM schema expression to obtain and return current iso output style,...
View ArticleForum Post: RE: OPIM - ISO output style can be read and used in OPIM schema?
Hi Maggie, STYLE is not available for use in EC expressions. Maybe you can state what you want to accomplish. There may be alternatives in getting there Regards, Frank
View Article