Forum Post: How to set a long bolt for wafer component in OpenPlant
My company's workspace has a problem, for wafer components, bolts were added in both ends, just like flange. In another workspace, the bolt is correct. I'd like to know where to control the bolt for...
View ArticleForum Post: Is there a easy way to select all bolts which used on different...
For example, I'd like to select all bolts of wafer component, is it possible?
View ArticleForum Post: RE: Is there a easy way to select all bolts which used on...
Hello Changsong, There are many aspects which you could check here. Selection of Bolts from spec can be made on whole assembly calculation value which includes Flanges, gasket, nuts etc. Based on that...
View ArticleForum Post: RE: Is there a easy way to select all bolts which used on...
Sorry, I did not express my problem exactly. I mean the bolt is already in the model, I just want to select them and delete them. The reason I want to do it, refer to my other questions, I created a...
View ArticleForum Post: RE: OPIM - script after converting output from DGN to DWG
if you know key-in command, you can create text in dgn. There is a sample: active level 1; active color 4; active style 0; active weight 1; active font 3; active txheight 2.5; active txwidth 2; active...
View ArticleForum Post: RE: Is there a easy way to select all bolts which used on...
Thanks to confirm Changsong, There is a wiki article to refer similar content. I am also checking the new End preparation settings and update soon on it. -Regards | Rahul Kumar
View ArticleForum Post: RE: Is there a easy way to select all bolts which used on...
Yes, that's the way how I revise the bolt length. And that's the reason why I ask this question. There are two kinds of length, the normal flanged end and wafer end, they are different in length. In...
View ArticleForum Post: RE: How to set a long bolt for wafer component in OpenPlant
Hello Changsong, Is this happening with your custom spec with new End prep type which you have created? Have you also modified your JOINT class in schema? I have installed 08.11.09.568 on my machine...
View ArticleWiki Page: Error:[5] Detail Sketch Not found in cell libraries
Applies To Product(s): OpenPlant Isometrics Manager Version(s): 08.11.09.XXX (SS5) | 08.11.11.XXX (SS6) Environment: Windows 7/8.1/10 (64 bit) Area: Settings/Attributes Subarea: Cell Template Original...
View ArticleWiki Page: Fundamentals - Basics of Class Editor Schemas
Applies To Product(s): OpenPlant Modeler Version(s): 08.11.09.XXX(SS5) | 08.11.11.XX(SS6) Environment: Windows 7/8.1/10 (64 bit) Area: Schema Subarea: Fundamentals Original Author: Bentley Product...
View ArticleWiki Page: How to Format Number Property in IsoSheet Name
Applies To Product(s): OpenPlant Isometrics Manager Version(s): 08.11.09.XXX (SS5) | 08.11.11.XXX (SS6) Environment: Windows 7/8.1/10 (64 bit) Area: Settings/Attributes Subarea: - Original Author:...
View ArticleWiki Page: Schema - OpenPlant Modeler
Schema - OpenPlant Modeler To Discuss Schema Customization Issue with use case with respect to OpenPlant Modeler See Index: Fundamentals - Basics of Class Editor Schemas How to Use Edit Tab for Copy...
View ArticleWiki Page: Basics For Opening Schema in Class Editor
Applies To Product(s): Bentley Class Editor Version(s): 08.11.09.XXX (SS5) | 08.11.11.XXX (SS6) Environment: Windows 7/8.1/10 (64 bit) Area: Class Editor Subarea: Schema Opening Original Author: Deepak...
View ArticleForum Post: RE: How to set a long bolt for wafer component in OpenPlant
No, it is a normal spec. Something wrong in the workspace. You cannot reproduce it in "good" workspace unless you found the place where to control long bolt for wafer end. Thanks a lot!
View ArticleForum Post: Olet problem in OpenPlant
I found some problems about olet. 1. Auto branch table is OK. If try to place a brach by snap to the main pipe, it will place the component defined in branch table. I did some test, if the main pipe...
View ArticleForum Post: RE: Olet problem in OpenPlant
Hello Changsong, Please see below response. For AutoBranch Table - I believe you are testing it with DN100 size. Using Auto Branch table, length exceeding twice the diameter (i.e. 114.3x2 = 228.6 ~229)...
View ArticleForum Post: RE: Olet problem in OpenPlant
1. OK. 2&3. Yes, one pipeline. Can you have a try? header pipe + olet + branch pipe.
View ArticleWiki Page: MSSQL database structure changes do not appear in Data Manager
Applies To Product(s): Bentley Data Manager Version(s): 08.11.09.140 Environment: N/A Area: Database Subarea: Original Author: Justinas Lipnickas, Bentley Product Advantage Group Overview After...
View ArticleForum Post: RE: Olet problem in OpenPlant
Hi Changsong, For Point 2, you can use joint association tool in iso-sheet manager to move joints from one iso-sheet to another. Regards, Harpreet
View ArticleForum Post: How to revise pipeline information efficiently
We have a problem here, the user inputed line number in wrong attributes. For example, there is line Area1-Service1-No1-Spec1, we should inpu Area1 in Area / Service1 in Service / etc. Unfortunately...
View Article